5 Fastest Ways To Blow Your Car Speakers

car speaker

Car speakers are truly great. They provide crystal clear audio of your favorite songs or radio shows. And, with today’s technology you can easily gain access to hundreds of different radio stations, podcasts and talk shows. There really is nothing more exciting and pleasing than cruising down the road with your friends jamming to your favorite songs with the volume cranked. The only problem with this is that speakers are extremely sensitive and they can be blown easier than you might imagine. Once they are blown you are going to have to replace them, which is going to be expensive. So, how can you avoid blowing your speakers and what are the five fastest ways to blow them?

Volume

One of the easiest and fastest ways to blow your speakers is by cranking up the volume too high and leaving it set there for prolonged periods of time. When this happens it causes the cone of the speaker to move in a manner that it wasn’t designed to. The cone will move further than it is supposed to and it will stress the material. This when eventually cause crucial parts of the speaker to collide with each other, which results in tearing, breaking, and loosening of these components.

Too Much Power

 

When you apply too much power to a speaker it can cause what is known as a thermal failure. The excess power will cause a lot of heat to build up. This excessive heat can cause the glue holding components together to come loose. Too much power can also result in wires melting. In some cases, the excess heat can even destroy the voice coils. When these situations occur you will have to replace the speakers and you can do that at https://www.hifisoundconnection.com/.

Improperly Designed System

 

If your system isn’t setup or designed write it can also result in blow speakers. If you are designing your own system it will be important to make sure that you have speakers that can handle your amp and vice versa. If you are unsure about how to do this, you can always get in touch with a professional or hit up an online forum.

Clipping

Clipping is a common condition that is usually seen in systems with a dedicated amplifier. Clipping will occur when an amp is overdriven and the tops and bottoms of the audio waveform are clipped off. When this happens it will cause the amp to send too much power to speakers. This might not be an instant blow, but it will guarantee that the speakers will blow at some point.

 

Careless Installation

If you are going to install your sound system yourself, you want to make sure that you take the time to do it right. A careless installation with loose wires can produce sparking that will result in a blown speaker. In careless installations, it is also possible for the protective frill to come loose. If the grill isn’t replaced it could result in piercing or tearing of the cone due to the fact that they are delicate.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.