October 28, 2020

    Daily Auto News, Luxury Cars, Photos, Prices, Spy Shots, Videos, Incidents and more

    Those who own a Ferrari Enzo don’t think about bringing it to a tuner because this car is already perfect as it is, but for some reason an American owner wasn’t completely satisfied with his Enzo, so he talked with the guys from ADV.1 Wheels and you can see the result above and blow, in the photo gallery.

    With only a month to complete the set in time for their event which would debut the car, although they weren’t really sure about tuning an Enzo themselves, the folks from ADV.1 Wheels once again created something amazing. This Ferrari Enzo sitting on a set of ADV5.2SL.

    The lightweight model is vehicle specific in terms of design and load rating in order to get the lowest possible weight based on the load rating of the vehicle it’s intended for. In this case the Enzo, however without enough time to engineer them to be as light as they really could be by testing sample pieces for load rating analysis this set was beefed up for safety purposes. However the tuner has done so with the 1 piece version which has shown results under 18 pounds in some sizes / applications such as the Lamborghini Gallardo 18×12 race setup.

    This Enzo comes with a nice set of rims and good tires, therefore the guys from ADV.1 chose for a set of Pirelli’s with size 375/20/21 in the rear. The wheel was designed around the massive rear in a 21×13 size with a 20×8.5 front using their 245/30/20. Once the wheel finish was done the tuner added the polished gunmetal lip/matte black center combination for this project as it’s subtle yet at the same time different from what you’d normally see.

    The Ferrarri Enzo takes its power from a V12 engine that delivers an output power of 660 bhp and 485 lb-ft torque. This car can sprint from 0 to 60 mph in 3.4 seconds, with 217 mph top speed. The Ferrari Enzo features 6-speed Semi-Automatic transmission and the gear shifts can be performed easily and smoothly even at higher loads.

    Ferrari Enzo Specifications:

    Vehicle Type: – production car, two doors coupe
    Configuration: – Mid Engine
    Engine: – V12
    Capacity: – 5988 cc
    Torque: – 485 lb-ft
    Horsepower: – 660 bhp
    Transmission: – 6-speed Semi-Automatic
    Wheelbase: – 104.3 inches
    Length: – 185.1 inches
    Width: – 80.1 inches
    Height: – 45.2 inches
    Weight: – 3020 lbs
    0-60 mph: – 3.4 sec
    Top speed: – 217 mph

    Cars , Custom cars , European , Ferrari , more , Other tuners , Tuners

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    If you're planning an Off-Road Adventure into the outback, as a minimum, you’ll need an air compressor. Be sure to read this guide to choose the best off road 12 volt air compressor.