Lexus LFA debuts at the Tokyo Motor Show (Video)

by Ionut Dragomir

Lexus LF-AAfter year’s of concepts, speculations and spy photos, finally a production version of the Lexus LFA is here with all the details. Public debut is today at the 41st Tokyo Motor Show.

This new supercar from Japan will reach customers in late 2010 or early 2011.

Under the hood is a 4.8-liter V10 that develops 560 horsepower at 8,700 rpm and 354 lb-ft of torque at 6,800 rpm. Redline is an impressive 9,000 rpm.

Power is sent to rear wheels via six-speed sequential gearbox taking the car from 0-100 km/h (0-62 mph) in 3.7 seconds, while the top speed is 202 mph (325 km/h).

65 percent of the body is carbon fiber and only 500 cars will be sold worldwide. It won’t be cheap compared to the current Japanese supercar – the Nissan GT-R. Cost is around $375,000 (250,000 Euros) with pre-sales starting already today. Production will start end of 2010.

We have no doubt that Lexus will sell them all very quickly. Rumor is that the development of LFA has been so costly that with a $375,000 price tag Lexus is still taking a loss on every car. For full details take a look at the press release after the gallery and videos.

Office workers are made up of parts of the whole, working on the project.
Vector illustration of teamwork concept. Office workers are made up of parts of the whole, working on the project.
Write For Us Automotive Blog - SpeedLuxSend us a Tip Automotive Car BLOG SpeedLuxJoin Our Team SpeedLux Automotive NewsContact Us Guest Posts Advertise Car BLOG

Press release:

Tokyo, October 21, 2009 – Lexus announces today the official launch of the LFA, a two-seat supercar scheduled to go into production at the end of 2010 as the pinnacle of the Lexus “F” premium sports car series. Pre-sales start today.

Ultra-responsive and extremely stable even when taken to the edge, the LFA creates a sense of reassurance that opens up a new world of driving emotion, exhilarating the senses to move the driver in more ways than one.

The LFA combines high output, superb chassis design and meticulous aerodynamics to achieve instantaneous total-vehicle response characterized by high-rev, seamless acceleration echoed by a self-defining resonance from its 4.8-liter V10.

Only 500 units of the LFA are to be produced and sold worldwide.

A prototype of the LFA is now on display at the 41st Tokyo Motor Show, which is open to the general public from October 24 to November 4 at Makuhari Messe in Makuhari, Chiba Prefecture.

1. Packaging brings out the most in fundamental performance

Strong and light

The newly developed 4.8-liter V10 engine boasts exceptional power, while lightweight materials (aluminum alloy, magnesium alloy and titanium alloy) and a very compact size (smaller than a conventional V8) allows for optimal weight distribution and an exceptional power-to-weight ratio.

Carbon fiber reinforced plastic (CFRP) cabin enhances high body-rigidity and reduces weight. This unique cabin is 100kg lighter than a comparable aluminum cabin. Detailed analysis and precise matching of CFRP materials allows for high rigidity and low weight. LFA CFRP production technology, including unique CFRP-to-metal joining, was completely developed by Lexus.

Balanced
Relatively higher weight components such as the engine and transmission are placed within the wheelbase. A low center of gravity is made possible by the use of dry sump lubrication1, along with placing peripheral components (oil pump, water pump) behind the engine. Furthermore, optimal placement of the transmission and the fuel tank in front of the rear axle adds to this application of centralized mass. This minimizes weight shift during cornering and contributes to outstanding performance and stability. Lighter weight components, like the radiator and electric fans, are placed behind the rear axle.

Combined with a front-engine and rear-wheel-drive configuration, the short, wide and low body allows the LFA to achieve its target front-to-rear weight distribution of 48:52.

Driver-centered
The driver’s seat is positioned near the LFA’s center of gravity. The centralized seating concept (with the seat between the front and rear axles and closer to the left–right center) is made possible by the use of a rear transaxle and vertically stacked torque tube and exhaust pipes reducing the width of the center tunnel. The driver placement is aimed to provide maximum car-to-driver feedback, especially under sport or high G-force driving conditions.

2. Emotive performance embodies an extraordinary driving experience

High–rev engine

Titanium valves, ultra–light weight rocker arms with a diamond–like coating and a fully integrated lower crankcase that reduces pumping losses at high RPMs combine to provide the driver with overwhelming acceleration right up to the 9,000rpm redline. The LFA’s purpose-built V10 delivers 90% of its peak torque between 3,700rpm and 9,000rpm.

Precise Response

Independent, electronically controlled throttle bodies ensure precise air-feed to each of the 10 cylinders, enabling immediate engine response from the accelerator pedal. The engine response time is approximately half the normal response time of a single-throttle valve.

The six-speed ASG transmission features heavy-duty synchronizer rings and a newly developed gearshift actuator, providing the driver with a very direct shift feel. Four selectable driving modes and a seven-stage shift-speed selector that results in upshift speeds down to 0.2 seconds provide a higher level of driver control.

Track-sized high-performance (Carbon Ceramic) CCM brake discs and Electronically Controlled Braking system generate ultra-powerful yet stable braking.

Responsive handling and engaging dynamics

The very light and rigid CFRP cabin, combined with a front double-wishbone suspension and a rear multilink suspension, result in a very stable, controlled ride. Detailed aerodynamic engineering results in elements such as a flat underbody, a diffuser and a speed-controlled rear wing, which allows precise vehicle response at all vehicle speeds, thus creating unity between driver and machine.

Vehicle Dynamics Integrated Management integrates numerous vehicle dynamic functions that provide a high level of vehicle stability and preventative safety without interfering with the driver’s intentions, especially when sport driving.

Exciting engine sound and L-finesse2 design
Equal-length exhaust manifolds combined with an equal-length dual exhaust system routed through a multistage titanium main muffler fine tunes the exhaust note.

An acoustically tuned surge tank linked to 10 individual throttle bodies creates a powerful induction sound. The coordination of intake and exhaust sounds overlap at various RPMs to create a unique, exciting and inspired soundtrack.

The exterior design includes carefully tuned aerodynamics and airflow management. The use of CFRP, in addition to strength and weight advantages, frees up the design of the exterior panels allowing a fresh supercar L-finesse design. The interior design combines state-of-the-art instrument-panel design and technology, along with a variety of custom-tailored interior trim packages to suit the most discerning drive

You may also like

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

SpeedLux

SpeedLux is a high-authority automotive blog providing the latest automotive news and reviews. SpeedLux covers everything related to cars, bikes, and motorcycles, from news and reviews, to troubleshooting guides, tips and tricks, and more. SpeedLux was born in 2009 and we have over 20,000 articles published on our blog. We thank all our readers, as well as our partners, without whom we could not have reached this level.

Subscribe

©2009 – 2024 SpeedLux – Daily Automotive News and Reviews. All Right Reserved.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More